Second Source 3D mark Second Source 3DParts you can't get anywhere else

Grand Power Stribog · Stribog Speed Loader · 9mm Magazine Loader

Stribog Speed Loader

Cam-action loader for Stribog 9mm waffle mags. Flip the cam and effortlessly drop in the next round.

Stribog speed loader snapped onto a Grand Power SP9A3 9mm waffle magazine Placeholder image
On the mag: Stribog speed loader snapped onto a Grand Power SP9A3 9mm waffle magazine, arm up

How it goes together: pin, cam, housing. No tools.

Photos above are illustrated placeholders. Real photos of the actual loader are coming soon: on the mag, in hand, and snapped apart.

$20 + $5 flat shipping, US only
Available now. $20 + $5 flat US shipping.
Add to cart $20 + $5 shipping Check fitment first

Sold right here. Add it to your cart below and check out by card. Card checkout is opening soon; the cart and totals are ready now.

Grand Power Stribog 9mm magazine loader for SP9A3, SP9A3S & SP9A1 Gen 2 curved and Gen 1 straight waffle mags. Flip the cam and effortlessly drop in the next round. One round at a time. No thumb pressure. Easier on your hands than any other loader.

  • Effortless loading. Flip the cam and effortlessly drop in the next round.
  • Unloads too. The built-in unloader notch on the back outer wall unloads the magazine.
  • No hardware. Snaps together. It assembles and comes apart with a snap. No tools. No screws to strip. The pin snaps in and stays put while assembled.
  • Arrives assembled. Ready to use. Nothing to install.
  • Fits SP9A3, SP9A3S, SP9A1 Gen 2 (curved) & Gen 1 (straight). Waffle mags only. Check fitment below before you buy.
Read this before ordering: this loader fits the standard factory waffle magazines: the original waffle-style mags for the SP9A3, SP9A3S, and SP9A1 Gen 2, plus the straight waffle mags for the SP9A1 Gen 1. It doesn't fit Global Ordnance (GO) magazines: the solid black mags with red followers. They are sold separately as an aftermarket accessory and have longer feed lips. New Stribogs ship with factory waffle magazines, and those fit. If the GO mag is your mag, this isn't your loader. Full checker below.

How this Stribog speed loader works

A cam-action 9mm magazine loader sized for the Grand Power Stribog waffle magazine body. This Stribog loader needs no tools and nothing to assemble. It arrives ready to snap on. Flip the cam and effortlessly drop in the next round. It unloads too, using the built-in unloader notch on the back outer wall.

Step 1: Snap on

Clip it over the feed lips

The body slides over the top of the magazine and the locking tab snaps into place. It stays put while you work. No holding it down with one hand while the other fights the spring.

Step 2: Flip the cam

Rotate the cam lever

Rotate the cam lever and the cam pushes the round down against the spring for you. No thumb pressure. That's what opens up room for the next round.

Step 3: Drop in the next round

Effortlessly drop in the next round, repeat

Effortlessly drop in the next round and let it seat. Flip the cam back and drop in the next one. One round at a time, all the way to a full mag. Easier on your hands than any other loader.

Stribog speed loader parts: body and lever arm that snap together. No hardware.

Snap-together Stribog loader: no hardware at all

This Stribog speed loader has no hardware. It assembles and disassembles with a snap. No tools needed. Nothing to install. It ships assembled and ready to use; if you ever take it apart, it snaps right back together.

  • No hardware, no tools. The parts snap together by hand. No screws, no fasteners, nothing to fit or install.
  • No screws to strip. The loader snaps together and apart with no tools and no screws to strip. The pin snaps into the assembly and stays put while assembled.
  • Parts swap easily. If a part ever wears out, it pops out and a replacement pops in. You do not need to replace the whole loader over one worn piece.

SP9A3 magazine loader fitment: will this Stribog loader fit your mag?

This Stribog loader fits Grand Power Stribog waffle magazines: the standard factory waffle-pattern mags. As an SP9A3 magazine loader, confirmed fits are SP9A3, SP9A3S, SP9A1 Gen 2, and SP9A1 Gen 1 (straight waffle mags). Pick the magazine you actually run. Thirty seconds here saves a return for both of us.

Pick your magazine

Select the mag you run on the left and you'll get a straight answer, including when the answer is “don't buy it.”

Stribog speed loader vs. the alternatives

There aren't many loader options for the Grand Power Stribog, and no other cam-action loader is made for it. The other option is a push-style loader. Here is how the two compare for this 9mm magazine loader.

How it loadsThe trade-off
Second Source Stribog speed loaderThis page
  • Flip the cam and effortlessly drop in the next round
  • One round at a time
  • Steady rhythm. Nothing to fill or line up first
  • One round at a time, same pace from the first round to the last
  • Controlled. No thumb pressure
Push-style loaders
  • Line a batch of rounds up on a clip
  • Plunger shoves them into the mag at once
  • Pain to line up all the rounds onto the clip
  • Cumbersome to use
  • The quick push only comes after that line-up. Total time roughly evens out
  • Single-round pistol-style loaders are worse still. One at a time, no cam leverage
Your thumbs
  • One round at a time
  • Full spring pressure
  • You already know how the last ten rounds feel

Order your Stribog speed loader

Add this SP9A3 magazine loader to your cart and check out by card: $20 each + $5 flat US shipping. Card checkout is opening soon; the cart below is ready, and your total today is exactly what you'll pay when checkout opens.

Warranty

We stand behind it. If anything goes wrong in the first 30 days, we’ll replace it, no questions asked. After that, we’ll still make it right. You just cover the shipping.

  • First 30 days: replacement, no questions asked
  • After 30 days: we’ll still make it right. You cover shipping.

Stribog Speed Loader

Grand Power Stribog 9mm magazine loader for SP9A3, SP9A3S & SP9A1 Gen 2 waffle magazines, plus SP9A1 Gen 1 straight waffle mags. Arrives assembled. Flip the cam and effortlessly drop in the next round.

$20 each + $5 flat shipping, US only
Quantity 1
Added to cart. 1 × Stribog Speed Loader is in your cart. See the summary and total.

Not sure about your magazine? Run the fitment checker first. This loader fits waffle magazines only. It doesn't fit Global Ordnance (GO) magazines: the solid black mags with red followers, sold separately.

Your cart

Your cart is empty. Choose a quantity and add the loader. Your total, including the $5 flat US shipping, will show here.

Card checkout opening soon

Secure card payment isn't live yet. Nothing will be charged. Your cart and total above are ready, and checkout will open right here at the same $20 price + $5 flat US shipping.

US shipping only. Magazine loader tool only. No firearm, magazine, or ammunition included.

Stribog loader FAQ

Answers to the questions we get most about this loader: fitment, how it works, and shipping.

Will this Stribog loader fit my SP9A3?

Yes. This Stribog loader fits the SP9A3, SP9A3S, and SP9A1 Gen 2 with standard factory waffle magazines, and the SP9A1 Gen 1 with its straight waffle-pattern magazines. Gen 1 fit confirmed by the designer. The SP9A3S runs the same waffle mags as the SP9A3, and the SP9A1 Gen 2 uses the identical factory curved waffle magazines and magwell. Grand Power factory magazines are interchangeable between SP9A1 Gen 2 and SP9A3 without modification.

Does this Stribog speed loader fit Global Ordnance (GO) magazines?

No. It doesn't fit GO mags. The solid black magazines with red followers are Global Ordnance (GO) magazines. They are sold separately as an aftermarket accessory, not the magazines that ship with a new Grand Power Stribog. New Stribogs ship with factory waffle magazines, and those fit. GO mags have longer feed lips, and this Stribog speed loader will not seat on them. It was designed for the standard factory Stribog waffle magazines for the SP9A3, SP9A3S, SP9A1 Gen 2, and SP9A1 Gen 1 (straight waffle mags). If your mag has a red follower, save your money.

Does this Stribog loader unload magazines too?

Yes. The loader loads and unloads. It has a built-in unloader notch on the back outer wall.

Is this a 10-round push loader?

No. This is a cam-action Stribog loader. It loads one round at a time. Flip the cam and effortlessly drop in the next round.

How much is shipping?

$5 flat US shipping. The Stribog speed loader is $20 + $5 flat shipping, US addresses only.

Why is this sold here instead of a marketplace?

Marketplaces take a cut of every $20 sale. Selling it right here, with a simple cart and card checkout, is part of how the price stays at $20 + $5 flat US shipping.

How do I check out and pay by card?

Add the loader to your cart above, check the total ($20 per loader + $5 flat US shipping), and use the Checkout button to pay by card. Card checkout is opening soon. Secure card payment is being finished, and when it opens the price and shipping stay exactly the same.

What if something goes wrong? What’s the warranty?

We stand behind it. If anything goes wrong in the first 30 days, we'll replace it, no questions asked. After that, we'll still make it right. You just cover the shipping. Get in touch with your order reference number and we'll sort it out.

Replacement parts

Contact us for issues, replacement parts, or anything else that comes up. Reach out through any of these and we’ll get you sorted.

$20 + $5 flat shipping
Order